Conical Cylindrical Gear Reducers
1. Product description
The oil tank or circulating lubrication should be used for the reducers. All the reducers are produced in accordance of the former one. But the circulating lubrication should best be adopted under the circumstances of high ambient temperature, large power, high speed or continuous running, so to decrease oil temperature and make best use of the reducer's load-bearing capacity, we can supply circulating lubrication unit. When the reducer works in lower ambient temperature, the oil temperature should higher than 0℃.
Single-stage: ZDY model, Double-stage:ZLY model, Three-stage:ZSY model, Four-stage:ZFY model
Transmission rate: single-stage 1.25~6.3, double-stage 6.3~20, three-stage 22.4~100.
3. Application area
Conical Cylindrical Gear Reducers are mainly applied to belt conveyer and some other transportation machines and the speed reducer can also be used in other general mechanical transmission organs of metallurgy, mining, chemical, coal, construction material, textile, oil /petroleum and so on.
4. Our service
Professional in transmission systematize solution & production based here, High quality and best service is our culture.We accept sample order to confirm quality. Trade assurance get full protection for you orders.
5. Product Pictures
Recommended Hot Products:
Worm Helical Gearbox For Loom HZ Series Planetary Gearbox Worm Gear Speed Reducer
Helical Gearbox Planetary Gear Reducer Bevel Helical Gearbox
Cycloidal Gear Reducer Parallel Shaft Helical Gear Motors NMRV Worm Gear Reducer
6. Our Factory
7. Our Certificate
1.Are you trading company or manufacturer?
We are factory.
2.What's your MOQ for each series gearboxes?
1 unit is ok for different types gearboxes motor.
3.How long is your delivery time?
Generally it is 30 days. or it is 60 days, it is according to quantity.
4.How to choose a gearbox which meets our requirement?
You can refer to our catalogue to choose the gearbox or we can help to choose when you provide the technical information of required output torque, output speed and motor parameter, etc,.
5.What information shall we give before placing a purchase order?
1)Type of the gearbox, ratio, input and output type, input flange, mounting position, motor information, etc.
4)Other special requirements.