The way of Gearbox Installation
Aug 21, 2018

Elastic coupling,tooth coupling or other non-rigid coupling shall be used to connect a reducer with a motor and working machine.The installation deviation of the reducer shall not be more than the permitted value of the coupling used.After installing,commissioning and aligning a reducer,you must fix the foot bolts firmly on the foundation or base frame.The gearbox shall be so installed that after the installation,the input shaft can rotate smoothly but not seize when one rotate it by hand.

      The first step is to make sure that the motor and the gearboxes are intact before installation, and strictly check whether the dimensions of the parts connected by the motor and the reducer match. Here are the dimensions of the motor positioning bump, the input shaft and the gearbox groove and the matching tolerance.

      The second step is to unscrew the screw on the outer dust hole of the reducer flange, adjust the clamping ring to align the side hole with the dust hole, and insert the inner hexagonal screw. After that, remove the motor shaft key.

      The third step is to connect the motor to the gearbox naturally. The concentricity between the output shaft of the gearbox and the input shaft of the motor must be ensured, and the outer flange of the two must be parallel. As the heart is not consistent, it will cause the motor shaft to break or gear reducer wear.

    *For more product parameters, size and price, please contact Hangzhou Starred-River Machinery Co., Ltd.




     Facebook:0086 18257963886

     Whatsapp:0086 18257963886

  • facebook