Categories

Hot Products

News

How To Select And Use The Perfect Gear Reduction Box?
Aug 21, 2018

     Try to use near ideal deceleration ratio: reduction ratio = servo motor speed / reducer shaft output speed.

     Torque calculation: For the life of the reducer, torque calculation is very important, and attention should be paid to the greater torque value of acceleration (TP), whether it exceeds the greater load torque of the reducer.

     Model selection and matters needing attention: the applicable power is usually the applicable power of the servo type on the market, the applicability of the reducer is very high, the working coefficient can be maintained above 1.2, but in the selection can also be decided by their own needs: A. Servo motor output shaft diameter can not be greater than the table used shaft diameter.       B. If the torque calculation work, the speed can meet the normal operation, but in full servo output, there are inadequate phenomena, we can drive the motor side, do current control, or do torque protection on the mechanical shaft, which is very necessary.

      Specific points for attention:

      1.determine the appropriate motor power. 

      2. use coefficient fB. 

      3. check the radial force. 

      4. choosing the right braking torque is sometimes very important. 

      5. several common sense questions that need attention.

     *For more product parameters, size and price, please contact Hangzhou Starred-River Machinery Co., Ltd.

      Tel:+86-571-89988766

      E-mail:802@china-sr.com

      Website:http://www.srgearboxes.com

      Wechat18257963886

      Facebook:0086 18257963886

      Whatsapp:0086 18257963886


  • QR CODE
  • facebook